Alc & Dicom Options; Dicom Offset - Barco Coronis Elite User Manual

Changing Display Functions
ALC & DICOM Options

DICOM offset

Introduction
DICOM DF will be recalculated only when another DICOM Offset is
selected. The DICOM DF will be recalculated based on the new offset
setting.
To select a DICOM offset:
Select the DICOM display function. See To select a display
1.
function (DF):, on page 46.
In the ALC & DICOM Options menu, use Up
2.
select DICOM Offset. Use Enter
Use Up
3.
Use Enter
4.
You can select the following offsets:
Dark Room
Preset
48
or Down to select an offset.
to save the changes.
Value
to go into edit mode.
Description
The DICOM DF will be recalculated tak-
ing an ambient light value of 0 lux into
account.
This means that the measured ambient
light does not influence the DICOM DF.
The DICOM DF will be recalculated tak-
ing a preset ambient light value into
account. This value is determined by the
selected Reading Room and can be
adjusted manually within certain limits.
or Down to