Settings Menu - Barco Coronis Fusion Online User's Manual

Settings menu

Name
DPMS
Power LED
User controls
Sound
Auto menu exit
OSD Orientation
Description
Allows to switch the display power
management system on/off. See note
below.
Allows to switch the power LED's on
state on/off. The LED's orange DPMS
state is not influenced by this setting.
So, when the display goes into power-
saving mode, the LED will turn orange,
even if it was switched off by this set-
ting
Allows to disable the user controls on
the front.
When switched off, the user cannot dis-
play the OSD until the user controls key-
code is entered.
To enable the user controls again, To
enable the user controls again using
the touch keys:, on page 32 or To
enable the user controls again using
the control wheel:, on page 32
Allows to switch the sound on/off.
When switched on, a short beep sounds
each time you touch a soft touch key.
Allows to switch the automatic menu
exit on/off. When switched on, the OSD
is closed automatically when left idle
for a certain time.
Select the desired orientation of the on-
screen display. The default position is
Landscape, but if you put the display in
portrait orientation, you should select
Portrait as OSD orientation as well. If
not, the OSD will not be easily readable.
Display information
29