Table of Contents
Advertisement
Operation
Input Selection
Name
Auto
DVI
DB15
Settings
Name
DPMS
Power LED
User Controls
Color Temp.
Preferred Input Freq.
42
Description
Automatically selects the input to which
a video signal is connected. If more than
one video signal is connected, priority is
given to DVI.
Select the digital input. Consequently,
the Automatic setting will be switched
off.
Select the analog input. Consequently,
the Automatic setting will be switched
off.
Description
Switch on/off the automatic power sav-
ing system (DPMS)
Switch the power LED on/off. Note: The
LED's orange DPMS state is not influ-
enced by this setting. So, when the dis-
play goes into power-saving mode, the
LED will turn orange, even if it was
switched off by this setting.
Disable the control wheel functions
Select a color temperature
Click the control wheel to select the
desired vertical frequency of the input
video signal. Select the best frequency
corresonding to your graphic board (see
the documentation of your graphic
board).
After changing this setting you must
reboot the PC so that the graphic board
changes the vertical frequency of the
video signal.
E-2320 C
Advertisement
Table of Contents
