Table of Contents
Advertisement
Operation
Test patterns
Test Patterns
1. Select the desired test pattern by clicking on the
corresponding thumbnail or selecting a pattern by name
from the Test pattern drop-down box.
2.
Click Show to display the pattern.
If you have selected Custom Image, you can select a bitmap
image (e.g., saved on the hard disk) as test pattern.
3. To hide the test pattern again, click inside the pattern.
Note:
The test pattern Auto Adjust can be used as test pattern for the
Auto Adjust functions in the display OSD.
E-2320 C
Figure 24: Test Patterns dialog
55
Advertisement
Table of Contents
