Barco E-2320 C Installation & User Manual page 37

Operation
6. Exit the menus and save the changes.
To enable user controls:
1. Do not use the control wheel for at least 3 seconds.
2. Rotate the control wheel 1 step clockwise.
3. Press the control wheel 2 times.
4. Rotate the control wheel 1 step counterclockwise. The on-
screen display appears.
Note: Steps 2 to 4 must be performed in maximum 3
seconds.
5. Rotate the control wheel to select Settings.
6. Press the control wheel to enter the Settings menu.
7. Rotate the control wheel to select User Controls.
8. Press the control wheel to switch from "Off" to "On".
9. Exit the menus and save the changes.
E-2320 C
SETTINGS
DPMS
Power LED
User Controls
Automatic Menu Exit
EXIT
On
On
Off
On
37