Troubleshooting
Problem description
Image contains not enough
grayscales
The PC does not start up
No image during PC start-up
Nothing happens when you
press or turn the control wheel
The image is non-proportionally
spread out over the screen
The image on the screen is
rotated 90°
E-2320 C
Possible tests or solutions
•
Adjust the Display Function to
DICOM by means of the
NioWatch software
•
You may have installed the
driver software with an
inappropriate selection of
Palette Settings. Install the
driver software again and set
Palette Settings to 24/32 bit
color.
•
Check the CMOS settings in
the PC BIOS
•
The display controller may not
be firmly seated in the
connector
•
Check the CMOS settings in
the PC BIOS
•
The User Controls may be
disabled. Please read the
paragraph about the "User
Controls" function.
•
Select another resolution in
the Windows "Display
Properties" control panel
•
Switch the "Scaling" function
(Geometry menu) in the
display OSD to "None" or
"Best Fit"
•
Rotate the image using the
display controller control
panel.
See the display controller
manual
65