Brightness Adjustment - Barco E-2320 C Installation & User Manual

Operation
To adjust Contrast:
1. Rotate the control wheel to display the on-screen display.
The Main Menu appears.
2. Rotate the control wheel to select Video Contrast.
3. Press the control wheel to enter the Video Contrast menu.
4. Rotate the control wheel to select Man Contrast adj.
5. Press the control wheel to execute the function.
6. Rotate the control wheel to change the Video Contrast value.
7. Press the control wheel to confirm the change of the value
and return to the Video Contrast menu.
To return to calibrated position:
1. Proceed as described above to enter the Video Contrast
menu.
2. Rotate the wheel to select Contrast CAL Pos.
3. Press the wheel to switch to calibrated position.
Additional information
If you change Contrast manually, the changed value is saved in
the memory.

Brightness adjustment

This adjustment is not necessary (and not available) when digital
video (DVI) is connected and selected.
By default, the brightness is set in calibrated (CAL) position.
34
VIDEO CONTRAST
Contrast CAL Pos
Man Contrast adj
EXIT
E-2320 C