Input Selection; Start Up The Input Selection - Barco Solaris LC40 Owner's Manual

7. INPUT SELECTION

Overview
•

Start up the Input Selection

• Selecting an Input Source
• Configuring input 2
• Selecting Compact PC
7.1 Start up the Input Selection
Steps to be taken
1. Press ENTER or ADJUST to start up the menus. (menu 7-1)
2. Select Select input.
3. Press ENTER.
The Select input menu appears. (menu 7-2)
Solaris LC40
Select input
Image settings
Audio settings
PiP settings
Compact PC Control
Advanced settings
Standby
Back
Menu 7-1
Remarks
When no module is inserted in the video input slot, line one indicate No module. There will be no indication next to line 2 and 3.
Select input
1. No module
2.
3.
4. HD-SDI
5. SDI
6. RGB
7. DVI
8. Compact PC
Configure input 2
Back
Menu 7-3
Line 4 will indicate the exact input name as the software detects itself the inserted input. The possibilities are : HD-SDI, DVI, RGB
or Audio. When Audio is indicated in the menu, it will be grayed out as this is not an image source.
R5976672 SOLARIS LC40 01042004
Select input
1. Video
2. RGB
3. S-Video
4. HD-SDI/DVI/Audio/RGB
5. SDI
6. RGB
7. DVI
8. Compact PC
Configure input 2
Back
Menu 7-2
7. Input Selection
39