Table of Contents
Advertisement
Operation
•
Automatic Geometry: The edges of the image should have
an intensity of at least 15% video amplitude. .
•
Automatic Phase: The image should contain sharp black-
white transitions, like a line pattern or characters.
•
Automatic Gain: The image should contain parts that are
completely black (0% video amplitude) and parts that are
full white (100% video amplitude).
Video Contrast
This menu is not available in DVI mode.
Name
Contrast CAL Pos
Man Contrast adj
Video Brightness
This menu is not available in DVI mode.
Name
Brightness CAL Pos
Man Brightness adj
Luminance
Name
Luminance Target
Caution: Increasing the luminance setting to a value higher than
100% may significantly decrease the lifetime of the display
backlight.
40
Description
Switch to calibrated position of contrast
Manually adjust contrast
Description
Switch to calibrated position of bright-
ness
Manually adjust brightness
Description
Manually adjust the luminance
The calibrated luminance is indicated as
100%
E-2320 C
Advertisement
Table of Contents
