Barco Color Coronis 2MP Installation & User Manual page 147

Driver re-installation, updates or removal
Uninstalling the BarcoMed 2MP2CF-3D driver
1. Insert your BarcoMed 2MP2CF-3D Software CD into your
computer's CD drive. If the "BarcoMed Product Installation
Wizard" doesn't start within one minute, browse the
contents of your Color Coronis 2MP Software CD and double
click on the file: "Setup.exe" to start the wizard.
2. The BarcoMed Product Installation Wizard will display its
welcome screen.
3. Make certain that the checkbox next to the driver is checked
and that all other checkboxes are unchecked (figure 46
below). Click "Install" to continue.
4. Click "Next".
5. On the next screen (see figure 47 on page 149), check the
checkbox next to "Uninstall this device" and click "Next" to
continue.
148
Figure 46
Color Coronis 2MP