BarcoMed Driver Tab
Resolution
This displays the currently selected display resolution.
Drawing Modes
In the Drawing Mode section you can choose from the following
Drawing Modes. If any of the options in this section are grayed
out, then they are not available for the model controller with
which you are working.
Enable DirectDraw
This option allows the user to enable or disable DirectDraw.
DirectDraw is a software interface that provides direct access to
display devices while maintaining compatibility with the
Windows graphics device interface (GDI). DirectDraw provides a
device-independent way for applications to gain access to the
hardware features of specific display devices. If you enable
DirectDraw, your application will have the choice of using
DirectDraw or GDI. If you disable DirectDraw, your application will
use GDI instead of DirectDraw. Please note that in any case, your
application can always use BarcoMed driver functions (i.e.
WinBarco) or other graphics extensions (such as OpenGL).
DirectDraw is enabled by default.
Enable 3D
This option allows the user to enable or disable 3D. 3D is enabled
by default.
Monitor Configuration
If the options in this section are grayed out, then they are not
available for the model controller with which you are working.
Color Coronis 2MP
79