After unpacking the display
Notice:
If, after installing the display or the system, you change the panel
orientation while an image is on the screen, the result depends
on your application:
•
In a Color Coronis system, the image orientation will adapt to
the new panel orientation automatically after a second.
•
If the I-switch software is installed and enabled, the image
resolution will also be adapted automatically to the new
panel orientation.
•
If you use the display stand-alone, the image orientation will
not change with the panel orientation.
Only the orientation of the on-screen display (OSD) will
change automatically in case "Orientation" in the OSD
Geometry menu is set to "Automatic".
To change the orientation of the image, you will have to
change the resolution in the Windows Display control panel
(if possible).
44
Color Coronis 2MP