Operators Manual
ALS 341
Contrast:
Display:
4.2 Service menu
The service menu contains function to configure the machine and check functions.
4.2.1
Calling the menu
The service menu is protected by a password. The sequence to enter the password will be
started by pressing simultaneously both speed keys. CODE is shown on the display. The
password is entered by pressing these keys:
1 x Speed up key
2 x Speed down key
3 x Contrast key
If all is correct, P_S_ is shown in the display.
4.2.2
Working with the service menu
Select a function
By pressing the FEED key, all functions are visible in the display.
Call a function
The shown function is called by pressing the Contrast key. The current function setting is
shown.
Change function value
The setting will be changed by pressing the FEED key.
Back to select a function
Pressing the Contrast key returns to the level to select a function.
Close the service menu
If the Contrast key is pressed during the QUIT function the service menu is closed and the
software goes back to the direct functions.
Release 4/04
Setting the sensitivity of the label sensor.
CX00 up to CX63. The X indicates the detection of label
material in the sensor.
Page 21
Operation