Operation; Direct Functions - Avery Dennison ALS 341 User Manual

Operators Manual
ALS 341

4. Operation

The operator panel allows an easy operation of the machine. There are 4 functions to operate
the machine.

4.1 Direct functions

The operator panel has a four-character display and 6 membrane keys. Each key has one
individual function.
Feed:
Display:
Speed up:
Speed down:
Display:
Position :
Position :
Display:
Attention:
Release 4/04
In the service menu, the service technician has the
possibility to configure the labeller according to your
application. This men menu is only for technician and
therefore protected.
Single start for one label.
OKAY
Higher dispensing speed
Lower dispensing speed
S020 until S550. The last digit is blinking to indicate the fractional
part of the number.
The message S020 means 2.0m/min and S550 means 55.0m/min.
The label position on the product will be moved right.
The label position on the product will be moved left.
0100 up to 9999. The last digit is blinking to indicate the fractional
part of the number.
The message 0100 means 10.0mm and 9999
999.9mm.
The start sensor should be positioned 10-30mm before the
dispensing edge.
Page 20
means
Operation