Factory Settings; Appendix 7.1 Factory Settings - Avery Dennison ALS 380 Operating Manual

7 A
PPENDIX
7.1 F
ACTORY SETTINGS
7
A
P PE ND IX
7.1

FACTORY SETTINGS

In the case of a memory error:
Function Value
VELO 0500
STOD 0000
POS 0500
POS 2 0000
POS 3 0000
VERT 0100
CONT 0035
E–SS 0064
LPIT 1000
PRDL AUTO
P_S_ LEDG
S_S_ LEDG
MLAB 0000
PDT 0000
PDWT 0000
EGRA 0600
TMOD OFF
Explanation
Labelling speed: 50.0 m/min
Distance between dispensing edge and label's leading edge: 0.0 mm
Distance between leading edge of product and label: 50.0 mm
Multiple labelling: Distance between the leading edges of the first and second label:
0 mm
Multiple labelling: Distance between the leading edges of the second and third label:
0 mm
Dispensing speed = conveyor belt speed
Sensitivity of the label stop sensor
Distance between label stop sensor and dispensing edge: 64 mm
Label distance: 100.0 mm
Product length = LPIT
Product sensor: Triggered by leading edge
Label stop sensor: Triggered by leading edge
Machine stops as soon as a product is not labelled.
Label stop = Printer start
Printer dwell time: 0.0 s
APSF compensation factor for RPM transmitter with 0.166 mm/pulse
Tandem operation off
– The message W__2 or E_12 appears on the
operator panel.
– All databanks are deleted.
– The settings of the machine are reset to fac-
tory settings [79].
82
ALS
380