Avaya Integrated Management User Manual page 38

Avaya Network Management Console Introduction
Figure 9: Options Dialog Box - Default Page
To add a new set of SNMP default parameters to the list:
1. Click Add. A new row opens in the Default table.
2. Select V1 or V3 from the Type drop-down list.
3. If you selected V1 in the Type field, enter read and write community values in their
respective fields.
4. If you selected V3 in the Type field, select a user name from the User drop-down list. The
user name must be defined in the Secure Access Administration application. For more
information, refer to the Avaya Secure Access Administration User Guide.
5. Enter a number in the Timeout [ms] field for the number of milliseconds Avaya Network
Management Server will wait for a response when polling a device.
6. Enter a number in the Retries field for the number of times Avaya Network Management
Server will try to poll a device.
7. Click Apply. The new default SNMP parameters definition is added to the Default table.
To change the position of a row in the Default table:
1. Select a row.
2. Click the arrows to move the row up or down in the table.
3. Click Apply. The new row position is saved.
To edit entries in the Default table:
1. Click the field you want to edit.
2. Edit the information in the field.
3. Click Apply. The changes are saved in the table.
38 Avaya Integrated Management Release 5.0 Network Management Console