Table of Contents
Advertisement
Figure 41: Provide SNMPv3 Parameters Screen
To enter the user parameters defined for a CM Server:
1. Enter and verify the SNMPv3 authentication password for the user name returned for this
CM Server.
Note:
The authentication scheme supported by the CM is displayed. This field is
Note:
read-only.
2. Enter and verify the SNMPv3 privacy password used to access this CM Server.
3. Click Next. The Configuration Wizard continues with the
screen.
Using the Configuration Wizard Screens
Server Certificate Verification
Issue 7 January 2008
103
Advertisement
Table of Contents
