Create Or Add Snmpv3 User - Avaya Integrated Management User Manual

Create or Add SNMPv3 User

The Configuration Wizard enables you to select the SNMPv3 user that is used to communicate
with the CM server. You can use an existing SNMPv3 user or create a new SNMPv3 user.
Figure 39: SNMpv3 User Screen
To use an existing SNMPv3 user:
1. Select the Existing SNMPv3 User option.
2. Select the user from the Select User drop-down list.
To create a new SNMPv3 user with which to communicate with the CM:
1. Select the New SNMPv3 User option.
2. Enter the user name for the new SNMPv3 user.
3. Enter the SNMPv3 authentication password, and enter it again to verify the password.
Note:
The authentication scheme supported by the CM is displayed. This field is
Note:
read-only.
4. Enter the SNMPv3 privacy password and enter it again to verify it.
To continue, click Next. The Configuration Wizard continues with the
Verification screen.
Using the Configuration Wizard Screens
Server Certificate
Issue 7 January 2008 101