Table of Contents
Advertisement
To remove a range from the Default table:
1. Select a range.
2. Click Delete.
3. Click Apply. The range is deleted from the Default table.
Setting SNMP Access Parameters for IP Ranges
The IP Wildcard page enables you to configure SNMP access parameters for ranges of
devices. Avaya Network Management Server tests the IP address of devices to poll against the
list of devices in the IP Wildcards list. If the IP address matches a range, the server uses the
range's SNMP access parameters when polling the device. The order in the list is important,
because the SNMP access parameters of the first range in the list that matches a device's IP
address are used for that device.
To view SNMP access parameters for IP ranges, click the IP Wildcard tab on the SNMP Access
page of the Avaya Network Management Console Options dialog box. The IP Wildcard page
appears.
Figure 10: Options Dialog Box - IP Wildcard Page
To add a new IP range to the list:
1. Click Add. A new row opens in the IP Wildcards table.
2. Select V1 or V3 from the Type drop-down list.
3. Enter an IP Wildcard in the IP Wildcard field.
4. If you selected V1 in the Type field, enter read and write community values in their
respective fields.
5. If you selected V3 in the Type field, select a user name from the User drop-down list. The
user name must be defined in the Secure Access Administration application. For more
information, refer to the Avaya Secure Access Administration User Guide.
6. Enter timeout and retry values in their respective fields.
7. Click Apply. The new range is added to the IP Wildcards table.
Avaya Network Management Console Options
Issue 7 January 2008
39
Advertisement
Table of Contents
