2. Click Edit. The Configuration Wizard continues with the
To remove an existing network:
1. Select the IP of the network from the Subnets Table.
2. Click Remove. The selected IP of the network is removed from the Subnets Table.
To continue, click Next. The Configuration Wizard continues with
Discovery.
Configure Subnet Details
The Configuration Wizard enables you to configure the subnet mask or router for the specified
subnet.
Figure 45: Configure Subnet Details Screen
To add/edit the parameters for a subnet:
1. Enter an IP address for the new subnet. When editing a subnet, this field displays the IP
address of the subnet you are editing.
2. Select whether you want to provide the subnet mask or router for this subnet, and enter the
mask or router IP address.
3. Click Next. The Configuration Wizard returns to
Managed
to enable you to manage other subnets.
Using the Configuration Wizard Screens
Configure Subnet Details
Step 5 - Start Network
Step 4 - Specify IP Networks to be
Issue 7 January 2008
screen.
107