Table of Contents
Advertisement
What's New in This Release
Avaya Network Management Console Release 5.0 introduces the following enhancements:
Support for Avaya Communication Manager Release 5.0:
●
- You can automatically configure Avaya Communication Manager Release 5.0 to work
with Avaya Network Management Console.
- All digital and analog phones that work with Avaya Communication Manager Release 5.0
are discovered and displayed in Avaya Network Management Console.
Support for the S8300C (Avaya Communication Manager/SES co-residency):
●
- The S8300C is displayed in VoIP System View as a branch under the co-resident Avaya
Communication Manager.
- SIP phones registered to the SES are discovered and displayed in Avaya Network
Management Console. You can search for these phones in the Port Connection table.
Support for the G450 branch gateway (including discovery, display in System View, trap
●
formatting, fault monitoring, administration, and port connections).
Support for the G860 high density trunk gateway.
●
Support for the following routers with the IG550 Integrated Gateway (including discovery,
●
display in System View, trap formatting, fault monitoring, and administration):
- J2320
- J2350
Support for the following media modules on the IG550 Integrated Gateway:
●
- TIM508 (8-port FXS Analog Telephony Interface Module)
- TIM516 (16-port FXS Analog Telephony Interface Module)
- TIM518 (8+8-port FXS/FXO Analog Telephony Interface Module)
Support for the following new set types:
●
- 9630G IP Telephone
- 9640G IP Telephone
The ability to manage IP Office devices. You can now run IP Office Manager R6.1 and
●
Avaya Provisioning and Installation Manager for IP Office from Network Management
Console.
What's New in This Release
Issue 7 January 2008
21
Advertisement
Table of Contents
