Filtering Events; Filtering By Severity Level - Avaya Integrated Management User Manual

4. Click Apply. The clean up method for the Event Log is configured. Whenever the Event Log
contains 10,000 events, this method will be used to remove the specified number of events
from the Event Log.
Note:
If you specify a CSV file for the event archive and the file is open when events
Note:
need to be archived, a new file is created containing all of the events in the old
archive. Archiving continues using the new file.

Filtering Events

By default, all events in the Event Log Browser are displayed in the Event Table. However, you
can filter events by severity level, category, source, device type, or acknowledgment status.
When you filter the Event Table, events that do not meet the filtering criteria are hidden.
However, they are not deleted from the Event Log. The following topics are discussed in this
section:

Filtering by Severity Level

●
Filtering by Category
●
Filtering by IP Address
●
Filtering by Device Type
●
Filtering by Acknowledged
●
Viewing All Events
●
Note:
You can only filter by one criterion at a time.
Note:
Filtering by Severity Level
To only view events of a given severity level:
1. Click . The cursor changes to a hand.
2. Click on the Severity column of an event with the desired severity. Only events with the
selected severity are displayed in the Event Table.
Or
1. Select View > Filter > Severity Filter. The Severity Filter dialog box opens.
Managing Events
Issue 7 January 2008 147