Advertisement
Quick Links
Avaya Open Networking Adapter 1101GT
Installation Job Aid
This Installation Job Aid provides an overview of your Open Networking Adapter (ONA). For
information about connecting the ONA to the Fabric Connect network, go to the Avaya Support
website, http://support.avaya.com and download the latest documents for your Avaya Virtual
Services Platform switch.
©
2015-2016, Avaya, Inc.
All Rights Reserved.
Release 2.0
NN48800-300
Issue 02.01
May 2016
1
Advertisement
Related Manuals for Avaya 1101GT
Summary of Contents for Avaya 1101GT
- Page 1 This Installation Job Aid provides an overview of your Open Networking Adapter (ONA). For information about connecting the ONA to the Fabric Connect network, go to the Avaya Support website, http://support.avaya.com and download the latest documents for your Avaya Virtual Services Platform switch.
- Page 2 While reasonable efforts have been made to ensure that the information in this document is complete and accurate at the time of printing, Avaya assumes no liability for any errors. Avaya reserves the right to make changes and corrections to the information in this document without the obligation to notify any person or organization of such changes.
- Page 3 Lead (including solder used in PCBs), Cadmium, Mercury, Hexavalent Chromium, and Bromine. Avaya declares compliance with the European Union (EU) RoHS Directive (2011/65/EU) in that Lead, which is a restricted hazardous substance, is used only in accordance to the exemption(s) to Article 4(1), item 7 granted by the European Union.
- Page 4 • Use the optional external power adapter. This adapter can supply power to the ONA if there is no PoE port available or, as a backup, if the PoE port fails. May 2016 Avaya Open Networking Adapter 1101GT Installation Job Aid...
- Page 5 2. Use the 10/100/1000 BASE-T RJ-45 port with the cloud symbol to connect the ONA to the network. If the upstream switch port is POE, POE+, or uPOE capable, it will also power on the ONA. May 2016 Avaya Open Networking Adapter 1101GT Installation Job Aid...
- Page 6 1 second but less than 5 seconds. Setting the ONA to factory defaults The following parameters are the ONA factory defaults: • Management IP Address : May 2016 Avaya Open Networking Adapter 1101GT Installation Job Aid...
- Page 7 After you modify the parameters and save the configuration, the ONA stores your changes in persistent memory and reboots. Note: Manual Configuration menu changes for default parameters are not required for SDN Controller Mode 0 operation. May 2016 Avaya Open Networking Adapter 1101GT Installation Job Aid...
- Page 8 4. Continue pressing and holding the reset button until the Status LED cycles through a red/ green/blue pattern. Then release the reset button. The Status LED will flash a steady amber, which indicates that the Manual Configuration menu is running. May 2016 Avaya Open Networking Adapter 1101GT Installation Job Aid...
-
Page 9: System Status Led
Green (slow blinking) Application starting (both modes) Green (fast blinking) IP address is acquired by DHCP (both modes) Green (steady) Application initialization completed. Connectivity is established and operating (both modes) Table continues… May 2016 Avaya Open Networking Adapter 1101GT Installation Job Aid... -
Page 10: Power Led
Power LED The Power LED is visible from either side of the unit. Table 2: Power LEDs Label Color and Status Description Power Blue (steady) Operating normally Table continues… May 2016 Avaya Open Networking Adapter 1101GT Installation Job Aid... - Page 11 • If the ONA is connected to an external power adapter, disconnect it for at least 45 seconds and then reconnect it. Running diagnostics on the ONA Use the diagnostics to verify that the ONA is operating properly. To enter Diagnostics, use following procedure: May 2016 Avaya Open Networking Adapter 1101GT Installation Job Aid...
- Page 12 Use this procedure to upgrade the ONA when you first receive it. This method uses a PC to access the ONA’s Manual Configuration menu. Procedure 1. From the PC that you are going to use for this upgrade procedure, go to the Avaya Support website, http://support.avaya.com, and download the ONA software image that you want to use.
- Page 13 11. Click Reboot into Operational Mode. 12. Disconnect the PC. Upgrading a deployed ONA See the Avaya Open Networking Adapter 1101GT Release Notes (NN48800-400) for the latest information on upgrading ONA software on a deployed service. May 2016 Avaya Open Networking Adapter 1101GT Installation Job Aid...