Table of Contents
Advertisement
Chapter 11
* Note: If you specify a CSV file for the trap archive and the file is
Filtering Traps
By default, all traps in the Event Log Browser are displayed in the Trap
Table. However, you can filter traps by severity level, source, device type,
or acknowledgment status. When you filter the Trap Table, traps that do
not meet the filtering criteria are hidden. However, they are not deleted
from the Event Log. The following topics are discussed in this section:
* Note: You can only filter by one criterion at a time.
Filtering By
To view only traps of a given severity level:
Severity
Level
Or
99
4. Click
. The clean up method for the Trap Log is configured.
Apply
Whenever the Trap Log contains 10,000 events, this method will
be used to remove the specified number of events from the Trap
Log.
open when traps need to be archived, a new file is created
containing all of the traps in the old archive. Archiving
continues using the new file.
•
Filtering By Severity Level
•
Filtering By IP Address
•
Filtering By Device Type
•
Filtering By Acknowledged
•
Viewing All Traps
1. Click
. The cursor changes to a hand.
2. Click on the
Severity
Only traps with the selected severity are displayed in the Trap
Table.
column of a trap with the desired severity.
Avaya Network Management Console User Guide
Advertisement
Table of Contents
