Boot File Needs Upgrading - Avaya IP Office 3.0 Installation Manual

IP Office IP Phone Installation Manual

Boot File Needs Upgrading

Having processed the upgrade script file, the software determines that the name of the boot code file in
the telephone does not match that in the upgrade script. The script specifies the name of the new file to
load.
1. The phone displays the file name and the number of kilobytes loaded.
2. The phone displays Saving to flash while the new boot file is stored in its flash memory. The
percentage of file stored and the number of seconds that have elapsed are shown. This will
usually take longer than it took to download the file.
3. The phone displays Restarting as it prepares to reboot using the new boot file.
4. The phone displays Initializing.
5. While the new boot file is uncompressed into RAM, the phone displays Loading. Since this takes
a while, asterisks, then periods, then asterisks are displayed on the second line to indicate that
something is happening.
6. When control is passed to the software that was just loaded, the phone displays Starting.
7. The phone displays Clearing whilst the flash memory is erased in preparation for rewriting the
code. The percentage of memory erased and number of elapsed seconds are also shown.
8. Updating is displayed whilst the boot code is rewritten. The percentage of boot code rewritten
and number of elapsed seconds are also shown.
9. When the new boot code has been successfully written into the flash memory, the phone resets
so that the status of the telephone application files can be checked.
10. Continue with the next procedure; No Application File or Application File Needs Upgrading.
Avaya IP Phone Installation
IP Office 3.0 Issue 10b (26th January 2005)
Page 32