Table of Contents
Advertisement
For the 8434DX Voice Terminal
There are two Call Appearance/Feature Button Designation Cards for the
8434DX voice terminal:
The smaller card contains two columns with five buttons in each column:
the first column is labeled a through e; the second column is labeled f
through j.
The larger card also contains two columns with 12 buttons in each column.
The button labels on this larger card are blank; that is, they are NOT
prelabeled with letters like the smaller card.
The four columns on the 8434DX voice terminal, totaling 34 button spaces,
can be used for specifying the telephone number, extension, or feature
assigned to each button.
To label the card, use the instructions under "How to Label the Blank
Designation Card" below.
How to Label the Blank Designation Card
To label the designation card
NOTE: Be sure to print the voice terminal's full telephone number, including
the area code, on the first call appearance button.
1. The transparent cover is attached to the frame of the voice terminal by
tabs on the top and bottom of the cover. Remove the cover by pulling the
top tab forward and then lifting the bottom of the transparent cover from
the voice terminal.
2. Print or type the desired labels on the blank designation card.
—
On the 8403, print or type the assigned features on your Feature
Directory next to the appropriate number or character, and print or
type the voice terminal user's extension in Sections a, b, and c.
—
On the 8405, 8410, 8411, and 8434DX, print or type the voice
terminal user's extension on the call appearance buttons and the
assigned features on the feature buttons.
3. Once you have placed the designation card(s) on the voice terminal, you
can replace the transparent cover by inserting the tabs at the bottom and
then pressing the top down until it clicks.
26
Advertisement
Table of Contents
