Table of Contents
Advertisement
Wall Installation
NOTE: The 8403, 8405, and 8410 voice terminals can be wall-mounted.
The 8411 and the 8434DX voice terminals CANNOT be wall-mounted.
For wall-mounting, you need a 1-foot D8W line cord (not supplied with the
voice terminal; Comcode: 103786760).
To wall-mount the 8403, 8405, and 8410 voice terminals
1. Make sure the 8-conductor wall mount plate is in place.
2. Press down on the handset retainer hook located under the handset and
slide it toward the top of the voice terminal. See Figure 6.
3. Rotate the hook and slide it back into its slot so the bottom part now
sticks out from the top. Snap the hook firmly into place. See Figure 6.
a. Handset
retainer
in place
c. Rotate
handset
retainer
180 degrees
FIGURE 6:
Reversing the Handset Hook
¾
b. Press to release
and then remove
handset retainer
d. Replace
handset
retainer
17
Advertisement
Table of Contents
