8434DX. See Figure 4. For more detailed instructions on installing the
expansion module to the 8434DX, use the instructions titled "801A
Expansion Module Instruction Manual," shipped with the expansion
module.
IMPORTANT: An 801A Expansion Module can be used ONLY with an
8434DX voice terminal connected to a DEFINITY G3V3.3 or later switch.
6. Snap one end of the coiled cord into the Handset jack. This jack is
labeled
cord into the channel leading to the side edge of the voice terminal; the
handset cord will then lead off the side of the voice terminal.)
WARNING: Do not insert the handset cord into the Adjunct jack.
It may cause equipment damage.
Line
jack
Adjunct
jack
NOTE: The location of the jacks and the routing channel
FIGURE 1:
Line, Adjunct, and Handset Cord Routing for Desktop Installation on
the 8403, 8405, and 8410 Voice Terminals
. (On some 8403 voice terminals, you must thread the
Routing channel
for line cord and
adjunct cord
Handset
jack
on the back of your voice terminal may differ slightly
from the location shown in this figure.
Desktop stand
> ABS <
12