Tools; Reboot; Factory Reset; Firmware Upgrade - Planet GSW-1602SF User Manual

4.13 Tools

4.13.1 Reboot

The Reboot page enables the device to be rebooted from a remote location. Once the Reboot button be pressed, user
have to re-login the WEB interface about 20 seconds later.

4.13.2 Factory Reset

The Factory Reset button can reset the GSW-1602SF/2404SF back to the factory default mode. Be aware that the entire
configuration will be reset; expect the IP address of the GSW-1602SF/2404SF. Once the Factory Reset item be pressed,
the screen in Figure 4-50 appears.
To reset the IP address to the default IP Address "192.168.0.100". Press the hardware reset button
at the front panel about 5 seconds. After the device be rebooted. You can login the management
Note
:
WEB interface within the same subnet of 192.168.0.xx.
Hardware Reset button

4.13.3 Firmware Upgrade

The Firmware Upgrade page contains fields for downloading system image files from the Local File browser to the
device.
To open Firmware Upgrade screen perform the folling:
1. Click Tools -> Firmware Upgrade
2. The Firmware Upgrade screen is displayed as in Figure 4-51.
3. Click the "Browse" button of the main page, the system would pop up the file selection menu to choose firmware.
4. Select on the firmware then click "Upload", the Software Upload Progress would show the file upload status.
Figure 4-50 Factory Reset screen
57