Planet GSW-1602SF User Manual page 20

destination –
SNMP Read
Community –
SNMP write
Community –
SNMP Trap
Community –
After change the default password, if you forget the password. Please press and release the
Note
"Reset" button in the front panel of GSW-1602SF/2404SF, the current setting includes VLAN, will
:
be lost and the GSW-1602SF/2404SF will restore to the default mode.
Utility, set the Trap IP Address of the manager workstation where the trap to be
sent
Functions as a password and used to authenticate the access right of the device.
The Read Community is restricted to read-only, for all MIBs except the
community table, for which there is no access.
Functions as a password and used to authenticate the access right of the device.
The Write Community accesses the device both read and write - configure to the
device via SNMP.
Identifies the community string of the trap manager
15