Port Access Control - Planet GSW-1602SF User Manual

• RADIUS UDP Port
• RADIUS Secret
Setup the RADIUS server and assign the client IP address to the Web-Smart switch. In this case, field in the default IP
Address of the Web-Smart switch with 192.168.0.100. And also make sure the shared secret key is as same as the one
you had set at the switch RADIUS server – 12345678 at this case.

4.10.2 Port Access Control

This table is to configure the per port network access control setting. By drawing and select the menu bar to define the port
control type.The screen in Figure 4-44 and Figure 4-45 appears.
The UDP port used by this server. The valid range is 0 - 65535.
The default UDP Port No. is 1812
Indicates if the shared secret for this server has been configured.
Figure 4-43 RADIUS Server configuration
Figure 4-44 Per Port network access control configure table
51