Planet GSW-1602SF User Manual page 35

About the VLAN ports connect to the hosts, please refer to 4.5.3.1 and 4.5.3.2 examples. The following steps will focus on
the VLAN Trunk port configuration.
1. Specify Port-8 to be the 802.1Q VLAN Trunk port, and the Trunking port must be a Tagged port while egress. The
Port-8 configuration as the following screen in Figure 4-21.
2. Assign the VLAN Trunk Port to be the member of each VLAN – which wants to be aggregated. At this sample, add
Port-8 to be VLAN 2 and VLAN 3 member port.
3. Repeat Step 1 and 2, setup the VLAN Trunk port at the partner switch.
4. To add more VLANs to join the VLAN trunk, repeat Step 2 to assign the Trunk port to the VLANs.
Figure 4-21 The configuration of VLAN Trunk port
Figure 4-22 Add VLAN Trunk port to each VLAN
30