Planet GSW-1602SF User Manual page 58

The 802.1X Parameters table includes the following fields:
• Reauthentication
Enabled
• Reauthentication
Period
[1-3600 seconds]
• EAP Timeout
[1-255 seconds]
Figure 4-46 802.1X Parameter configuration screen
This select field allows the user to enable or disable reauthentication of the
supplicant for the specified port. If "Enabled" be checked, reauthentication will
occur. Otherwise, reauthentication will not be allowed. Changing the selection will
not change the configuration until the Apply button is pressed.
The default value is not "Enabled"
This input field allows the user to enter the reauthentication period for the
selected port. The reauthentication period is the value, in seconds, of the timer
used by the authenticator state machine on this port to determine when
reauthentication of the supplicant takes place. The reauthentication period must
be a value in the range of 1 and 65535. Changing the value will not change the
configuration until the Apply button is pressed.
The default value is 3600.
This input field allows the user to enter the EAP timeout for the selected port. The
EAP timeout is the value, in seconds, of the timer used by the authenticator state
machine on this port to timeout the supplicant. The EAP timeout must be a value
in the range of 1 and 255.
The default value is 30.
53