Lacp Status - Planet GSW-1602SF User Manual

When using a port link aggregation, note that:
Note
:
• The ports that can be assigned to the same link aggregation have certain other restrictions (see
• Ports can only be assigned to one link aggregation.
• The ports at both ends of a connection must be configured as link aggregation ports.
• None of the ports in a link aggregation can be configured as a mirror source port or a mirror
• All of the ports in a link aggregation have to be treated as a whole when moved from/to, added
• The Spanning Tree Protocol will treat all the ports in a link aggregation as a whole.
• Disconnect all link aggregation port cables or disable the link aggregation ports before removing

4.7.3 LACP Status

The LACP Status page display the current LACP aggregation Groups and LACP Port status.
To open LACP Status screen perform the folling:
1. Click Status -> LACP Status
2. The "LACP Aggregation Overview" and "LACP Port Status" screen is displayed as in Figure 4-31.
LACP Aggregation Overview Table
The default setting is "Auto"
below).
target port.
or deleted from a VLAN.
a port link aggregation to avoid creating a data loop.
Figure 4-31 LACP Status
39