Page 2
Disclaimer PLANET Technology does not warrant that the hardware will work properly in all environments and applications, and makes no warranty and representation, either implied or expressed, with respect to the quality, performance, merchantability, or fitness for a particular purpose.
Page 3
Do not dispose of WEEE as unsorted municipal waste and have to collect such WEEE separately. Revision PLANET 16-Port 10/100/1000Mbps 802.3at PoE+ Ethernet Switch User's Manual For Model: GSW-1600HP Revision: 1.0 (February, 2013) Part No.: 2351-AK5020-000...
PoE power for 16 IEEE 802.3af PoE IP camera devices at the same time. The GSW-1600HP also can support for connecting to one 16-Channel NVR or two 8-Channel NVR systems, also uplink to backbone switch and monitor center. With high performance switch architecture, the recorded video files from 16 IEEE 802.3af...
Idle Mode Link Down power saving Intelligent Scales Power based on cable length The Idle mode Link Down power saving of the GSW-1600HP complies with Pre- IEEE 802.3az Energy Efficient Ethernet (EEE) standard to automatically lower power for a given port when it is not linked. The Intelligent Scales Power technology actively determines the appropriate power level based on the cable length.
❏ LED indicators for PoE ready and PoE activity ❏ Ethernet Link Energy-Saving technology Link down power saving Intelligent scales power based on cable length 1.4 Specification GSW-1600HP Model 16-Port 10/100/1000Mbps 802.3at PoE+ Ethernet Switch Hardware Specification Network Connector...
Page 8
Power Requirement AC 100~240V, 50/60Hz, 3.5A max. Power Consumption Max. 260 Watts / 885 BTU Dimension (W x D x H) 445 x 207 x 45 mm (1U height) Weight 2.54kg Power over Ethernet IEEE 802.3af Power over Ethernet / PSE PoE Standard IEEE 802.3at Enhancement Power over Ethernet / Per Port 52V DC, 300mA.
Before connecting any network device to the GSW-1600HP, please read this chapter carefully. 2.1 Front Panel The Front Panel of the GSW-1600HP 802.3at PoE+ Ethernet Switch consists of 16 x Auto-Sensing 10/100/1000Mbps Ethernet RJ-45 Ports. The LED Indicators are also located on the front panel of the GSW-1600HP.
2.2 Rear Panel The rear panel of the GSW-1600HP PoE Fast Ethernet Switch indicates an AC inlet power socket, which accepts input power from 100 to 240V AC, 50-60Hz, 3.5A. Figure 2-2: GSW-1600HP Switch Rear Panel 1. The device is a power-required device, it means, it will not work till it is powered.
1000Base-T, 100Base-TX and 10Base-T networks. Users only need to plug a working network device into one of the 10/100/1000Base-T ports, and then turn on the GSW-1600HP. The port will automatically runs in 10Mbps, 20Mbps, 100Mbps or 200Mbps and 1000Mbps or 2000Mbps after the negotiation with the connected device.
3.1 Desktop Installation To install the 802.3at PoE+ Ethernet Switch on desktop, simply follow the next steps: Step1: Attach the rubber feet to the recessed areas on the bottom of the 802.3at PoE+ Ethernet Switch, as shown in Figure 3-1. Figure 3-1: Attaching the Rubber Feet to the 802.3at PoE+ Ethernet Switch Step2: Place the 802.3at PoE+ Ethernet Switch on desktop near an AC power...
Step5: Supply power to the 802.3at PoE+ Ethernet Switch. A. Connect one end of the power cable to the 802.3at PoE+ Ethernet Switch. B. Connect the power plug of the power cable to a standard wall outlet. When the 802.3at PoE+ Ethernet Switch receives power, the Power LED should remain solid Green.
3.3 Product Application Department/ Workgroup PoE Switch: Providing 16-Port PoE in-line power interfaces, the GSW-1600HP can easily build a power centrally-controlled IP phone system, IP Camera system and Wireless AP group for the enterprise. Cameras can be installed around the corner in the company or campus for surveillance demands.
AC sockets. 30 Watts Since the GSW-1600HP per PoE port supports 51V DC PoE power output, please check and assure the Powered Device (PD) accept- able DC power range is from 51V DC. Otherwise, it will damage the Note Powered Device (PD).
4. Power over Ethernet Overview What is PoE? The PoE is an abbreviation of Power over Ethernet; the PoE technology means a system to pass electrical power safely, along with data on Ethernet UTP cable. The IEEE standard for PoE technology requires Category 5 cable or higher for high power PoE levels, but can operate with category 3 cable for low power levels.
Page 17
Powered Source Equipment (PSE) Power sourcing equipment (PSE) is a device such as a switch that provides (sources) power on the Ethernet cable. The maximum allowed continuous output power per cable in IEEE 802.3af is 15.40 W. A later specification, IEEE 802.3at, offers 25.50 W.
Page 18
The data pairs are used. Since Ethernet pairs are transformer coupled at each end, it is possible to apply DC power to the center tap of the isolation transformer without upsetting the data transfer. In this mode of operation the pair on pins 3 and 6 and the pair on pins 1 and 2 can be of either polarity.
Why connects PoE device to GSW-1600HP and it cannot power on? Solution: Please check the cable type of the connection from GSW-1600HP (port 1 to port 16) to the other end. The cable should be an 8-wire UTP, Category 5 or above, EIA568 cable within 100 meters.
Appendix a networking connection A.1 Switch's Data RJ-45 Pin Assignments - 1000Mbps, 1000Base-T PIN NO MDI-X BI_DA+ BI_DB+ BI_DA- BI_DB- BI_DB+ BI_DA+ BI_DC+ BI_DD+ BI_DC- BI_DD- BI_DB- BI_DA- BI_DD+ BI_DC+ BI_DD- BI_DC- Implicit implementation of the crossover function within a twisted-pair cable, or at a wiring panel, while not expressly forbidden, is beyond the scope of this standard.
Page 21
The standard cable, RJ-45 pin assignment The standard RJ-45 receptacle/connector There are 8 wires on a standard UTP/STP cable and each wire is color-coded. The following shows the pin allocation and color of straight cable and crossover cable connection: SIDE 1 SIDE 2 Straight Cable 1 = White/Orange...
*Model Number: GSW-1600HP * Produced by: Manufacturer‘s Name : Planet Technology Corp. Manufacturer‘s Address: 10F., No.96, Minquan Rd., Xindian Dist., New Taipei City 231, Taiwan (R.O.C.) is herewith confirmed to comply with the requirements set out in the Council Directive on the Approximation of the Laws of the Member States relating to Electromagnetic Compatibility Directive on (2004/108/EC).
Need help?
Do you have a question about the GSW-1600HP and is the answer not in the manual?
Questions and answers