Login The Switch - Planet GSW-1602SF User Manual

3.2.2 Login the Switch

Before you start configure the GSW-1602SF/2404SF, please note the GSW-1602SF/2404SF is configured through an
Ethernet connection, make sure the manager PC must be set on same the IP subnet address. For example, the default
IP address of the GSW-1602SF/2404SF is 192.168.0.100, then the manager PC should be set at 192.168.0.x (where x is
a number between 2 and 254), and the default subnet mask is 255.255.255.0. Use Internet Explorer 5.0 or above Web
browser. Enter IP address http://192.168.0.100 (the factory-default IP address) to access the Web interface.
When the following login screen appears, please enter the default password "admin" and press Login to enter the main
screen of GSW-1602SF/2404SF. The login screen in Figure 3-1 appears.
1. For security reason, please change and memorize the new password after this first setup.
Note
:
2. Only accept command in lowercase letter under web interface.
Figure 3-1 Login screen
10