4.11 Filter Configuration
The GSW-1602SF/GSW2404SF support per-Port IP Filter function to management the IP traffic flow. With the IP Filter
configuration, administrator can block the specify source IP Address range. The screen in Figure 4-47 appears.
The Filter Configuration page includes the following fields:
• Port
• Mode
• IP Address
• IP Mask
• DHCP Server
Allowed
Figure 4-47 Filter Configuration screen
Indicate port 1 to port 24 for the IP Filter setting.
To "Enabled" or "Disabled" the IP Filter on the selected port. If "Enabled" be
selected, the next two fields are allowed to be configured. Press "Apply" to active
the IP Filter setting on the port.
This input field allows the user to enter the "Source IP network address" to be
filtered on the selected port. This field has to co-work with the "IP Mask" filed.
This input field allows the user to enter the "IP Mask" of the Source IP address to
be filtered on the selected port.
To allow the ICMP DHCP request and reply packets be pass through the port
even the IP address of the DHCP server inside the range of the Filter list.
54