Planet GSW-1602SF User Manual page 19

The page includes the following configurable data:
DHCP Enable -
IP Address -
Subnet Mask -
Gateway -
Management VLAN -
System Name –
Password -
Inactivity Timeout –
SNMP Enable –
SNMP Trap
Figure 4-3 Misc Configuration screen
Choose what the switch should do following power-up: transmit a DHCP request,
or manual setting (Disable). The factory default is Disable.
The IP address of the interface. The factory default value is 192.168.0.100
The IP subnet mask for the interface. The factory default value is 255.255.255.0
The default gateway for the IP interface. The factory default value is
192.168.0.254
Specifies the management VLAN ID of the switch. It may be configured to any
value in the range of 1 - 4093. The management VLAN is used for management
of the switch.
Defines the user-defined device name
This function provides administrator to secure Web login
Specifies a time period for the user login. The web interface will be auto logout if
there're no actions from the login user.
The default value is 300 seconds; 0 means no inactivity time limit.
Enable or Disable the SNMP function of the device. While set to enable, the
manager could remotely get the interface status and received the traps
information.
The Trap function enables the Switch to monitor the Trap through the Web Switch
14