Filter Configuration - Planet GSW-1602SF User Manual

4.11 Filter Configuration

The GSW-1602SF / GSW2404SFsupport per-Port IP Filter function to management the IP traffic flow. With the IP Filter
configuration, administrator can block the specify source IP Address range. The screen in
The Filter Configuration page includes the following fields: Table 4-31 Description of the Filter Configuration.
Item
Description
Port
Indicate port 1 to port 24 (GSW-24024SF), port 1 to port 16 (GSW-1602SF) for the IP Filter
setting.
Mode
To "Enabled" or "Disabled" the IP Filter on the selected port. If "Enabled" be selected, the next
two fields are allowed to be configured. Press "Apply" to active the IP Filter setting on the port.
IP Address
This input field allows the user to enter the "Source IP network address" to be filtered on the
selected port. This field has to co-work with the "IP Mask" filed.
IP Mask
This input field allows the user to enter the "IP Mask" of the Source IP address to be filtered on
the selected port.
DHCP Server
To allow the ICMP DHCP request and reply packets be pass through the port even the IP
Allowed
address of the DHCP server inside the range of the Filter list.
Figure 4-79 Filter Configuration
Table 4-31 Description of the Filter Configuration
-110-
User's Manual of GSW-1602SF / GSW-2404SF
Figure 4-79 appears.