Problem Solving; Troubleshooting; If You Have Any Of These Problems - Panasonic DP-2000 Operating Instructions Manual

Problem Solving

Troubleshooting

If You Have Any of These Problems

Mode
During Transmission
Transmission Copy
Quality
During Reception
Continued on the next page...
Symptom
Document doesn't 1. Check that your document is free of staples and paper
feed/multiple feeds clips, and that it is not greasy or torn.
2. Check that your document is the right type to send through
an ADF by consulting the list on "Originals You Cannot
Send". If your document has the characteristics listed, use
the Platen instead.
3. Check that the document is loaded properly.
Does not stamp Check Fax Parameter No. 004 and No. 028 settings.
Stamp too light Replace stamp or refill ink.
Vertical lines on the Check own copy quality. If copy is OK, your machine has no
transmitted document problem, report to the receiving party that they have a
problem. If copy is NG, clean the Scanning Area.
Transmitted document
is blank
Replenish the recording paper.
: Add Paper
Recording paper Remove the misfed paper.
misfeed (See Operating Instructions (for Copier) P .58)
Recording paper Make sure that there is paper in the Paper Tray(s). Follow the
doesn't advance into instructions for loading paper.
machine
Recording paper Check to see if the recording paper has misfed inside of the
doesn't eject after machine.
printing
Document auto Check Print Reduction settings.
reduction doesn't work
Replace the Toner Cartridge.
: Add Toner
Install the Waste Toner Box.
: No Waste Toner
Box
Cause / Action Page
35
30, 31
155
--
--
--
--
--
67
--
--
151