Verification Stamp - Panasonic DP-2000 Operating Instructions Manual

Troubleshooting

Verification Stamp

The Verification Stamp contains ink. When the stamp mark appears faded or hard to see, the stamp should be
replaced or refill the ink.
To remove the stamp
1
2
3
4
(see Note 1) (see Note 2)
NOTE
1. Please contact your local Authorized Panasonic Dealer to purchase a new stamp. See page 72 of the Operating
Instructions (For Copier) for order number.
2. Stamp ink refills can be purchased from a stationary store. Use blue Shachihata" X" Stamp ink (No. 22113) or its
equivalent.
Open the ADF Input Tray.
Open the ADF Exit Cover.
(1) Remove by pulling the Stamp Assembly
upward.
(2) Remove the Stamp. Replace the stamp
with a new one or refill the stamp with a few
drops of the specified ink into the back of
the stamp.
Reinstall the Stamp Assembly.
PROBLEM SOLVING
155