Adjusting the Volume
You can adjust the monitor and ringer volume on your machine. The built-in speaker enables you to hear the dial
tone, dialing signals, and busy tone. The ringer sounds when your machine receives a call.
Setting the Monitor Volume
Make sure that the FAX lamp is ON. If not, press
1
You will hear the dial tone through the speaker.
2
or
3
(see Note 1)
NOTE
1. You can also adjust the volume of the key touch tone and the volume of the buzzer in the Fax Parameter No. 010
(KEY/BUZZER VOLUME). (See page 30)
repeatedly to raise the volume.
repeatedly to lower the volume.
INSTALLING YOUR MACHINE
to select the "FAX MODE".
* MONITOR *
MONITOR VOLUME
LOW
[
MONITOR VOLUME
LOW
[
] HIGH
] HIGH
15