Panasonic DP-2000 Operating Instructions Manual page 35

Customizing Your Machine
No. Parameter
088
LINE SELECTION
[See Note 4]
089
LIST OUTPUT TRAY
095
DUPLEX PRINT
097
SPECIAL TRAY
No.1 - 3
099
MEMORY SIZE
(Flash Memory)
(see Note 1)
(see Note 2) (see Note 3)
NOTE
1. Setting number marked with an asterisk (*) indicates the factory standard setting.
2. This parameter supports an optional telephone service "Distinctive Ring Service" provided by your local
telephone company. It allows up to 4 different telephone numbers to be assigned on a single telephone line with
a distinctive ring for each telephone number. By selecting the appropriate ring pattern associated with the
telephone number assigned for your fax machine. It can differentiate and answer the incoming call on the fax
number. All other calls on the other telephone numbers will not be answered. This optional service from your
local phone company is also called Custom Ringing, Distinctive Ringing, Ident-a-call, Ident-a-ring, Personalized
Ringing, RingMaster, RingMate, Selective Ringing, Smart Ring or something similar. Check with your local
telephone company on the availability of this service in your area.
3. This parameter is available only when the Parallel Port Interface Kit is installed.
4. This parameter is available only when the G3 Communication Port Option is installed.
Setting
Setting
Number
*1 Auto Setting the home position for the Telephone Line selection.
Auto: Selects the available telephone line for transmission
2 Line-1
Line-1: Selects this as the default telephone line, unless manually
3 Line-2
Line-2: Selects this as the default telephone line, unless manually
*1 Inner 1 Selecting the Output Tray home position for List printout.
Inner 1 : The List printout exits to the Bottom Output Tray.
2 Inner 2
Inner 2 : The List printout exits to the Upper Output Tray (Blue).
3 Outer
*1 Invalid Selecting whether the machine performs duplex print.
2 Valid
*1 None Select up to 3 Special Trays that will not be used for printing
received faxes (4-Tray configuration). One Tray must always be
2 Tray 1
available for receiving Faxes.
(You can specify one Tray (1 ~ 4) for each selection No. 1, No. 2
3 Tray 2
and/or No. 3)
4 Tray 3
5 Tray 4
- - Displays the amount of base and optional memory installed.
(Base Memory + Optional Memory)
(see Note 4)
PROGRAMMING YOUR MACHINE
Comments
automatically.
selecting an alternate phone line.
selecting an alternate phone line.
33