Printing Documents - Panasonic DP-2000 Operating Instructions Manual

Receive To Memory

Printing Documents

After receiving a document with the Receive To Memory feature, the following message will appear on the
display.
To print the document(s), follow the steps below.
Make sure that the FAX lamp is ON. If not, press
1
2
3
4
5
Enter the password to print the documents.
(See Note 1)
Ex: 1 2 3 4
6
Machine will start to print the documents.
(see Note 1) (see Note 2)
NOTE
1. If the password has not been set, your machine will not prompt you to enter the password.
The documents will be printed immediately after pressing
2. Once the RCV TO MEMORY feature is set to "On", the password cannot be changed (Fax Parameter No. 037
will not be shown on the LCD display). If you wish to change the password, set RCV TO MEMORY feature to
"Off" first. Then change the password. (See page 98)
ADVANCED FEATURES
MESSAGE IN MEMORY
< RCV TO MEMORY >
to select the "FAX MODE".
SELECT MODE
ENTER NO. OR
RCV TO MEMORY=ON
1:OFF 2:ON 3:PRINT
RCV TO MEMORY=PRINT
1:OFF 2:ON 3:PRINT
INPUT PASSWORD
INPUT PASSWORD
* PRINTING *
MEMORY RCV'D DOC
SET in step 4.
(1-5)
1234
99