Setting Your Logo - Panasonic DP-2000 Operating Instructions Manual

INSTALLING YOUR MACHINE
User Parameters

Setting Your LOGO

When you send a document, your LOGO appears on the top of the copy printed out at the other station.
The LOGO helps to identify you to someone who receives your document.
Make sure that the FAX lamp is ON. If not, press
1
2
3
4
Enter your LOGO (max. 25 characters and digits) by using
the Character keys (See page 10).
Ex:
If you make a mistake, use
beyond the incorrect character, press
enter the new character.
If more than 19 characters are entered, the left side
characters will scroll off the display.
5
(see Note 1)
NOTE
1. Your Company Name or your name must be set as your LOGO because it is required by the Telephone
Consumer Act of 1991. (For details, see FCC NOTICE at the end of these Operating Instructions)
18
repeatedly until display shows;
P A N A S O N I C
to select the "FAX MODE".
or to move the cursor
CLEAR then re-
SET MODE (1-4)
ENTER NO. OR
1:USER PARAMETERS?
PRESS SET TO SELECT
LOGO
LOGO
PANASONIC