Table of Contents
Advertisement
Problem Solving
Troubleshooting
24
Downloaded From ManualsPrinter.com Manuals
Check
Unit Does Not Operate
Does the display light?
Does the Energy Saver key flash (or light)
and the display is turned OFF?
(See page 18)
Does any of the U## codes and messages
appear on the display?
(U01, U07, U13, U14....etc.)
Does the Add Paper indicator and message
appear on the display?
Does the Misfed Paper indicator, message
and J## codes appear on the display?
Does E#-## codes and messages appear on
the display?
The machine would not accept the next job
during operation, instructed job would not be
accepted for a long time period or job would
not be completed.
Light Copies
Does the scanning contrast indicator say
" " or "
" (Lighter)?
Does the Add Toner indicator and message
appear on the display?
Action
Check if the Power Switch (Main Power Switch
on the Right Side of the machine) is turned ON
and if the power cord is plugged into the AC
outlet.
Press Energy Saver key on the control panel.
Perform actions in accordance with each
message.
Add paper. (See pages 26-27)
Remove the misfed paper. (See pages 30-32)
Turn the Power Switch on the Right Side of the
machine to the OFF and ON position. If the
error code does not clear, call your Service
provider.
Turn the Power Switch on the Right Side of the
machine to the OFF and ON position.
Press the "CONTRAST" key to adjust the
scanning contrast. (See page 10)
Replace the Toner Bottle.
(See pages 28-29)
Hide quick links:
Advertisement
Table of Contents
