Setting Your Id Number (Fax Telephone Number) - Panasonic DP-2000 Operating Instructions Manual

INSTALLING YOUR MACHINE
User Parameters

Setting Your ID Number (Fax Telephone Number)

If the remote machine does not have a Character ID but it has an ID Number, when sending or receiving, your
ID Number will appear on the remote machine's display and their ID Number will appear on your display.
We suggest you use your facsimile telephone number as your ID number. (max. 20 digits)
Make sure that the FAX lamp is ON. If not, press
1
2
3
4
Enter your ID (max. 20 digits) by using the key pad and
SPACE
Ex:
SPACE 1 2 1 2
If you make a mistake, use
beyond the incorrect number, press
enter the new number.
5
(see Note 1)
(see Note 2)
NOTE
1. You may use
your country code.
Ex :+1 201 555 1212
+81 3 111 2345
2. Your Fax Telephone Number must be set as your ID Number because it is required by the Telephone Consumer
Act of 1991. (For details, see FCC NOTICE at the end of these Operating Instructions)
20
repeatedly until display shows;
.
2 0 1 SPACE 5 5 5
to enter a "+" character at the beginning of the ID number to indicate the following digit(s) for
+1 for U.S.A. country code.
+81 for Japan country code.
to select the "FAX MODE".
or to move the cursor
CLEAR
then re-
SET MODE (1-4)
ENTER NO. OR
1:USER PARAMETERS?
PRESS SET TO SELECT
ID NO.
ID NO.
201 555 1212