On-Hook Dialing - Panasonic DP-2000 Operating Instructions Manual

Sending Documents

On-Hook Dialing

For On-Hook Dialing, follow the steps below.
Make sure that the FAX lamp is ON. If not, press
1
a
Place original(s) face up on the ADF.
1
b
Place a book or an original face down on the Platen
Glass.
2
You will hear dial tone through the monitor speaker.
3
Dial the telephone number from the keypad.
Ex: 5 5 5 1 2 3 4
4
When you hear a beep,
(see Note 1) (see Note 2) (see Note 3)
NOTE
1. If you need a special access number to get an outside line, dial it first then press
(represented by a "-") before dialing the full number.
Ex
: 9 PAUSE 5551234
2. If you are using Pulse dialing and you wish to change to Tone dialing in the middle of dialing, press
(represented by a "/").
The dialing mode will be changed from Pulse to Tone after dialing the digit "/".
Ex
: 9 PAUSE TONE 5551234
3. The second Telephone Line (L-2) is not available for On-Hook Dialing.
to select the "FAX MODE".
or
BASIC OPERATIONS
ENTER STATION(S)
THEN PRESS START 00%
* MONITOR *
* DIALING *
5551234
ON LINE * XMT *
PAUSE PAUSE to enter a pause
TONE
59