Redialing; Automatic Redialing; Manual Redialing - Panasonic DP-2000 Operating Instructions Manual

BASIC OPERATIONS
Sending Documents

Redialing

Automatic Redialing

If a busy line is detected, the machine will redial the number up
to 5 times at 3 minutes interval. However, if a busy line is not
detected, the machine will redial only one time. During that time,
a message will appear as shown to the right.
A file number is shown in the upper right hand corner of the
display if it is a memory transmission file.

Manual Redialing

You can also redial the last dialed number manually by pressing
To redial the last dialed number through memory
Make sure that the FAX lamp is ON. If not, press
1
Make sure that the MEMORY lamp is on.
2
3
The document is stored into memory with a file number.
Then dials the last dialed number.
(see Note 1)
NOTE
1. While the unit is displaying "WAIT TO DIAL", you can press
64
Set document(s) face down.
WAIT TO DIAL
(Telephone number)
key.
REDIAL
to select the "FAX MODE".
ENTER STATION(S)
THEN PRESS START 00%
TEL. NO.
5551234
* STORE *
* DIALING *
5551234
REDIAL
to start redialing immediately.
NO.001
NO.002
PAGES=001 01%
NO.002