ADVANCED FEATURES
Department Code
Changing or Erasing the Department Code
If you have to change or erase any of the Department Codes, follow the steps below.
Make sure that the FAX lamp is ON. If not, press
1
2
3
If you set the Access Code to restrict the Fax Parameters
settings, the unit prompts you to Input the Access Code.
Input the Access Code and press
4
5
6
Enter the Department Code number you wish to change
or erase.
Ex:
110
(01 to 50)
1 2
to select the "FAX MODE".
.
SET
SET MODE
(1-4)
ENTER NO. OR
INPUT ACCESS CODE
FAX PARAMETER(1-99)
NO.=
77 DEPT. CODE
2:VALID
DEPT. CODE
(01-50)
ENTER NO. OR
INPUT DEPT. NAME
12 PANASONIC SALES